How To Wire A Waterproof Micro Switch

 

Knowing how to wire a micro switch is essential for micro switch applications. 微动开关很小, but it has a significant effect on our daily life, such as computer mice, 汽车电子, 通讯设备, 军品, 检测设备, 燃气热水器, 燃气热水器, 燃气灶, 小家电, 微波炉, 电饭煲, 和医疗设备, 楼宇自动化, 电动工具和通用电气和无线电设备, 24-小时计时器, 欢迎来电咨询！. The waterproof micro switch is one of the switches. Because of its waterproof characteristics, it is often used in places with harsh environments.

Start to learn the micro switch wire.

Micro switch wire is a kind of micro switch with wiring. Compared to other lever /roller lever/long lever/pin plunger micro switches, the wiring micro switch is handy in most mechatronics projects or when you need a primary sensor.

When you press the micro switch by a mini force, the switch will act snap-action, and you can get the “咔嚓” 声音. 有时, people prefer to name the switch a momentary microswitch.

Why should we know how to wire a micro switch correctly?

Do you want to use the micro switch properly in your dishwasher? You should first learn the micro switch wiring because the unionwell waterproof micro limit switch is widely used in the dishwasher door lock system! To properly install the micro switch inside the dishwasher with wire, it’s necessary to learn the following contents about micro switch wiring. ( For all dishwasher manufacturers):

首先, you should understand the micro switch contact terminals.

A diagram of the micro switch makes your understanding easy. Especially micro switches appear in your life first. When you design a dishwasher in 3D Drawing, you will find the existence of the micro switch. So small it. Please don’t be worried about it. The components of micro switch refer to the following micro switch diagram:

COM terminals— The power must connect the com terminals; all micro switch applications should do it.

NO terminals— The terminals mean Normally Open. You should connect the wire to the NO terminals to stop running the motor. Ordinarily open means the microswitch stays in no working state. The circuit of the microswitch doesn’t have a current.

NC terminals–The terminals are Normally Closed. When you plan to start the system, you should connect the wire to the NC terminal.

第二, you need the following tools to do a practice drill.

1. Unionwell微动开关
2. Battery
3. An electrical device ( lamp )
4. Wire (5amp red and black)
5. Soldering iron
6. Scissors to cut wires
7. Clamps to hold wires while they are being soldered

After preparing everything above, you can do the test microswitch smoothly!

现在, connect the micro switch with a wire to the battery; the batteries positive connect the Normally Open and Normally Closed micro switch with two wires, and the other wire connects the COM terminals and the lamp.

最后, another wire should run from the battery’s harmful to the lamp. This wiring method automatically allows such a lamp to be switched on using the micro switch.

If you install the micro switch inside the dishwasher, an NC terminals microswitch is vital for the door lock system! When you close the dishwasher door, the action accurate the micro switch inside the door, and the dishwasher starts to run the washing work. It is used as a mini safety device!

微动开关的工作原理?

The device’s motor is usually connected to the com terminal of the microswitch. This connecting leads into the switch and energizes the spring/lever/roller lever/long lever. Because these contact components touch the customarily closed pin, it sends power out. NC Terminals is called a resting state. When you pressure the micro switch’s spring/lever/roller/long lever, the components are moved, and the power is transferred to the normally open pin.

We can use the SPDT micro switch in NC or NO mode, separately or simultaneously, depending on the application.

Microswitch Terminals

一般来说, 微动开关有三个端子. One is a common terminal, an open terminal, 另一个是封闭的终端. 公共点就像插座中的中性线. 通常, the open terminal opens the switch, the terminal when the current flows and the closed point disconnects the current through the contact. Put the wiring to the corresponding position, and it will work well.

优力纬尔首页: Micro switch china factory/company/manufacturer/supplier

惠州市优力纬尔微控 & 电子, 有限公司 专注于汽车行业和家电行业的高优质微动开关. 主要产品包括基本微动开关, 防水微动开关, 风压开关, 机械键盘开关, 和门开关.

为了更好地保证产品价格, 交货时间和质量控制, 我们收购了 惠州冠泰电子, 有限公司 在 2021. 我们将其作为我们的中国生产基地，拥有超过 1000 员工和 260 万件/年的生产能力.

又由优力纬尔微控收购的惠州冠泰电子有限公司 是一家 具备ISO9001, IATF16949 和 ISO14001 全系列产品获得全球准入许可认证的认证微动开关制造商, 其中包括 ENEC, UL, CE, CB等全球安规认证, 欢迎来电咨询！.

我们的全球影响力覆盖北美, 欧洲, 亚洲和南美洲.

我们的大多数业务合作伙伴/终端客户都是 全球的 500 企业, 包括世界知名家电品牌和北美、欧洲领先的汽车供应商.

未来不久, 我们将要建设一个 新产业园基地作为优力纬尔公司总部， 优力纬尔总部位于广东省, 惠州市, 广东省; 总部将会引进更多的自动化设备, 这将大大提高微动开关生产线的生产能力，2022年，预计将会达到 260 万件大幅提升到 1.3 亿件/年的产能.

打造一站式微动开关服务体系, 其中涵盖产品开发, 精密成型, 注塑成型, 精密冲压, 自动化设备，研发&制造团队, 组装和测试.

优力纬尔专业的销售团队 随时为您的 3D 绘图请求提供帮助和快速响应, 并提供产品报价, 更重要的是，优力纬尔工程师将会根据客户的最终产品应用，使用软件设计微动开关，并对其微动开关进行测试和验证，使其符合客户产品的应用需求.

核心价值:

目标, 责任, 协调, 创新

努力, 发展, 开放性, 正直

我们的任务:

我们有义务维持经得起时间考验的长期关系.

我们的愿景:

成为全球一流的精密元器件和模块制造商.

想要查询更多的信息, 请访问我们的 Unionwell Microswitch Website.