You Should Know Before Soldering Micro Switches

The micro switch is a sensor switch. To ensure the normal function of the micro switch, when manually soldering the microswitch, select a temperature less than 320 °C and ensure that the procedure can be completed within three seconds. På samma gång, it should be noted that do not apply pressure on the terminal during work. Otherwise, the device may not function properly.

If the switch is used on a relatively small current or voltage, it is best to use the Au cladding contact’s low power circuit. På samma gång, when using the switch, pay attention to waterproofing, and the temperature should be within the specified range. Only by satisfying all the above conditions can the switch exert its maximum power and ensure the regular operation of the equipment. Only in this way can the service life of the switch be extended.

Unionwell: A China Microswitch Supplier & Manufacturer

Unionwell är en leverantör och tillverkare av gränslägesbrytare med mer än tio års erfarenhet av mikrobrytare. Realizing the importance of limiting switch to industry development, vi ser det som en väsentlig produkt och bidrar mycket för att få det att fungera bättre. I den senaste tiden, vi har utvecklat en ny modell gränslägesbrytare.

As a well-known manufacturer of microswitches in the industry, Unionwell has established good cooperative relations with many household appliances and automotive electronics manufacturers.

Welcome to our website for more information about the microswitch: https://www.unionwellswitch.com.