Pressure Switch Symbol Types
High-Pressure Switch Symbol
The high-pressure switch symbol is one of the pressure switches. The pressure switch is a high-pressure switch and a low-pressure switch. Now we will learn about the high-pressure switch.
What Is A High-Pressure Switch
A high-pressure switch is a discrete sensor that, rising pressure, can run the switch to open or close. The specified pressure setpoint varies with different devices.
Vanligtvis, A high-pressure switch has two circuits connect types: NO (Normally Open) high-pressure switch and NC(Normally Closed) pressure switch.
High-Pressure Switch Symbol
Symbol A from the image is an NC switch in the following pictures. When the pressure rises, it will cause the switch to open. This symbol A is an NC high-pressure switch symbol. Symbol A shows the lever above the contact terminals. If the pressure is too high to above the specified setpoints, the switch will open and shut off the pump, adding pressure to the system.
Symbol C from the image is an NO switch. When the pressure rises, it will cause the switch to closed. The symbol C is a NO high-pressure switch symbol. Symbol C shows the lever above the contact terminals. If the pressure drops to the setpoint, the switch will close, and the compressor tank will add pressure to the system, so the high switch will be applied in the compressor tank to maintain the pressure inside.
Low-Pressure Switch
A low-pressure switch is a small device that will open or close a circuit of the system only
when the pressure value drops to a mini setpoint pressure. The low-pressure switch is one of the pressure switches. You may widely use it in the pressure safety system.
Low-Pressure Switch Symbol
The low-pressure switch can be divided into NO(Normally Open) low-pressure and NC(Normally Closed) low-pressure switches. The symbol of the low-pressure switch also is different from another.
Symbol B from the image is an NC pressure switch. In symbol B, you can see that the switch lever is below the contact terminal. The low-pressure switch is widely used to monitor the oil pressure. If the oil pressure drops to a safe pressure lever, the switch will change to the open state, and the system will stop running. This is a whole running process of a low-pressure switch!
Symbol D from the image is a NO pressure switch. A low-pressure switch usually lets the switch arm below the contact terminal from the pictures. When the pressure rises to a high-pressure lever, the switch will close the circuit and widely appears in the motor starting!
So the high-pressure switch lets the switch arm lever above the contact terminals, but the low-pressure switch lets the arm below the contact terminals. The two kinds of pressure switches have NO types and NC types.
Global Electrical Pressure Switch Symbols Standard
Reference the industry standard, here are the following standard regarding electrical pressure symbols:
- IEC 60617 (also known as British Standard BS 3939).
- NFPA / JIC. Also adopted by the NMTBA (National Machine Tool Builders Association).
- ANSI Y32.2-1975 (also known as IEEE Std 315-1975).
- IEEE Std 91.
You can also learn more knowledge about different global standards on Wikipedia.
Learn more about Gränslägesbrytare symbol.
Order Air Pressure Switches Product
Unionwell Micro switch Kina Tillverkare: År av professionell R&D Team
Vår unionwell tillverkar och utvecklar mikroswitchlösningar och genomför produktutvärderingar för våra kunder i ett verkligt starttillstånd. På det här sättet, våra kunder kommer att lita på oss att switchen kommer att fungera i bilen de designar innan den skickas. Vi tillhandahåller även applikationsdesigntjänster för att stödja våra kunder under designfasen.
Huizhou Unionwell Sensing & Control Electronics Co., Ltd specialiserar sig på kvalitetsmikrobrytare för bilindustrin och vitvaror för hushållsapparater. Huvudprodukterna inkluderar grundläggande mikrobrytare, vattentäta strömbrytare, lufttrycksbrytare, mekaniska tangentbordsbrytare, och dörrbrytare.
För bättre prisgaranti, ledtid, och kvalitetskontroll, vi förvärvade Huizhou Greetech Electronics Co., Ltd i 2021. Vi gjorde det till vår produktionsbas i Kina med över 1000 anställda och a 260 miljoner stycken/år produktionskapacitet.
Huizhou Greetech är en ISO9001, IATF16949 och ISO14001 certifierad tillverkare av mikrobrytare vars kompletta serie av produkter har beviljats globala tillståndscertifikat, vilket innefattar ENEC, UL, CE, CB, etc.
Nu, Vår globala räckvidd täcker Nordamerika, Europa, Asien, och Sydamerika.
De flesta av våra affärspartners/slutkunder är Global 500 företag, inklusive världsberömda hushållsmaskiner och ledande billeverantörer i Nordamerika och Europa.
Inom kort, vi lanserar en ny industriell bas på Longmen, Huizhou, Guangdong-provinsen; automationsutrustning kommer att införas, vilket avsevärt skulle förbättra switchens produktionskapacitet från 260 miljoner stycken till över 1.3 miljarder stycken/år.
Ett one-stop-system kommer att byggas, som omfattar produktutveckling, precisionsgjutning, formsprutning, precisionsstämpling, automatiserad utrustning R&D, montering, och testning.
Det professionella säljteamet finns till hands för att ge hjälp och snabbt svar på 3D-ritningsförfrågningar, prisuppgift, and access to an effective sample program that allows engineers to test and qualify switches for their end product applications.
Core Value:
Goal, Responsibility, Coordination, Innovation
Effort, Development, Openness, Integrity
Our Mission:
We are obligated to maintain long-term relationships that stand the test of time.
Our Vision:
To become a first-class global manufacturer of precision components and modules.
