Trykkbrytersymboltyper
High-Pressure Switch Symbol
The high-pressure switch symbol is one of the pressure switches. The pressure switch is a high-pressure switch and a low-pressure switch. Now we will learn about the high-pressure switch.
What Is A High-Pressure Switch
A high-pressure switch is a discrete sensor that, rising pressure, can run the switch to open or close. The specified pressure setpoint varies with different devices.
Som oftest, A high-pressure switch has two circuits connect types: NO (Normalt åpen) high-pressure switch and NC(Normalt stengt) pressure switch.
High-Pressure Switch Symbol
Symbol A from the image is an NC switch in the following pictures. When the pressure rises, it will cause the switch to open. This symbol A is an NC high-pressure switch symbol. Symbol A shows the lever above the contact terminals. If the pressure is too high to above the specified setpoints, the switch will open and shut off the pump, adding pressure to the system.
Symbol C from the image is an NO switch. When the pressure rises, it will cause the switch to closed. The symbol C is a NO high-pressure switch symbol. Symbol C shows the lever above the contact terminals. If the pressure drops to the setpoint, the switch will close, and the compressor tank will add pressure to the system, so the high switch will be applied in the compressor tank to maintain the pressure inside.
Low-Pressure Switch
A low-pressure switch is a small device that will open or close a circuit of the system only
when the pressure value drops to a mini setpoint pressure. The low-pressure switch is one of the pressure switches. You may widely use it in the pressure safety system.
Low-Pressure Switch Symbol
The low-pressure switch can be divided into NO(Normalt åpen) low-pressure and NC(Normalt stengt) low-pressure switches. The symbol of the low-pressure switch also is different from another.
Symbol B from the image is an NC pressure switch. In symbol B, you can see that the switch lever is below the contact terminal. The low-pressure switch is widely used to monitor the oil pressure. If the oil pressure drops to a safe pressure lever, the switch will change to the open state, and the system will stop running. This is a whole running process of a low-pressure switch!
Symbol D from the image is a NO pressure switch. A low-pressure switch usually lets the switch arm below the contact terminal from the pictures. When the pressure rises to a high-pressure lever, the switch will close the circuit and widely appears in the motor starting!
So the high-pressure switch lets the switch arm lever above the contact terminals, but the low-pressure switch lets the arm below the contact terminals. The two kinds of pressure switches have NO types and NC types.
Global Electrical Pressure Switch Symbols Standard
Reference the industry standard, here are the following standard regarding electrical pressure symbols:
- IEC 60617 (also known as British Standard BS 3939).
- NFPA / JIC. Also adopted by the NMTBA (National Machine Tool Builders Association).
- ANSI Y32.2-1975 (also known as IEEE Std 315-1975).
- IEEE Std 91.
You can also learn more knowledge about different global standards on Wikipedia.
Learn more about Grensebrytersymbol.
Order Air Pressure Switches Product
Unionwell Mikrobryter Kina Produsent: År med profesjonell R&D Team
Vår unionwell produserer og utvikler mikrobryterløsninger og gjennomfører produktevalueringer for våre kunder i en faktisk oppstartstilstand. På denne måten, våre kunder vil stole på oss at bryteren vil fungere i bilen de designer før den sendes. Vi tilbyr også applikasjonsdesigntjenester for å støtte våre kunder under designfasen.
Huizhou Unionwell Sensing & Control Electronics Co., Ltd spesialiserer seg på kvalitetsmikrobrytere for bilindustrien og hvitevarer av hvitevarer. Hovedprodukter inkluderer grunnleggende mikrobrytere, vanntette brytere, lufttrykkbrytere, mekaniske tastaturbrytere, og dørbrytere.
For bedre prisgaranti, ledetid, og kvalitetskontroll, vi skaffet oss Huizhou Greetech Electronics Co., Ltd i 2021. Vi gjorde det til vår produksjonsbase i Kina med over 1000 ansatte og en 260 millioner stykker/år produksjonskapasitet.
Huizhou Greetech er en ISO9001, IATF16949 og ISO14001 sertifisert mikrobryterprodusent hvis komplette serie med produkter har fått sertifiseringer for global tilgangstillatelse, som inkluderer ENEC, UL, CE, CB, etc.
Nå, Vår globale rekkevidde dekker Nord-Amerika, Europa, Asia, og Sør-Amerika.
De fleste av våre forretningspartnere/sluttkunder er Global 500 bedrifter, inkludert verdenskjente merkevarer for husholdningsapparater og ledende billeverandører i Nord-Amerika og Europa.
Om kort tid, vi lanserer en ny industriell base på Longmen, Huizhou, Guangdong-provinsen; automatiseringsutstyr vil bli introdusert, som ville forbedre bryterproduksjonskapasiteten betydelig fra 260 millioner stykker til over 1.3 milliarder stykker/år.
Det skal bygges et one-stop system, som dekker produktutvikling, presisjonsstøping, sprøytestøping, presisjonsstempling, automatisert utstyr R&D, montering, og testing.
Det profesjonelle salgsteamet er tilgjengelig for å gi hjelp og rask respons på 3D-tegningsforespørsler, pristilbud, and access to an effective sample program that allows engineers to test and qualify switches for their end product applications.
Core Value:
Goal, Responsibility, Coordination, Innovation
Effort, Development, Openness, Integrity
Our Mission:
We are obligated to maintain long-term relationships that stand the test of time.
Our Vision:
To become a first-class global manufacturer of precision components and modules.
