What Are The Precautions For Micro Switches

• If it is to fix the main body of the switch, use a small M2 screw, and then place the small screw on a smooth surface with a torque below 0.098N·m to fix it. 게다가, to prevent the screw from loosening, it is best To use washers under the screws.
• In the free state of the action body, you must pay attention not to apply force to the button or exciter directly but to apply force in the vertical direction corresponding to the button when using it.
• The action setting after the microswitch action should be based on more than 70% of the OT value. When the switch is turned on, the action body cannot be directly set at the action limit position. 그렇지 않으면, it will be easy. The opening and closing caused by the impact will shorten its service life.
• Even if the action characteristic of the microswitch jumps up or down 20% of the specification value, it will not cause malfunction due to changes.
• In the case of soldering with a micro switch, you must remember to use an electric temperature with a temperature adjustment of 320℃max.) and complete the operation within 3 seconds. Do not place the terminal on the terminal during the operation’s completion. Exert force.
• Suppose the microswitch is used under a small current and voltage. 그 경우, it is recommended to use a low-power circuit instead of a high-power one.

후이저우 유니언웰 센싱 & 컨트롤전자㈜, 주식회사. 다양한 마이크로 스위치 생산 및 혁신에 전념하고 있습니다.. Unionwell is also an electronic component, 마이크로 스위치, and mechanical keyboard switch manufacturer.

Unionwell G5 시리즈 기본 마이크로 스위치 제품 목록 >>

Over the past ten years since its establishment, we have worked together under the General Manager’s leadership and done wonders again and again. We believe teamwork can create a future and make success.

자세한 내용은, please visit our unionwell website.