サニフロマイクロスイッチの交換

サニフロポンプ, サニフロトイレにあります, 毎日の標準的なデバイスです. しかし、ポンプが機能しにくい、または動作しないことがわかった場合? Because the micro switch in the saniflo pump doesn’t work! 次, we need a replacement for a Unionwell microswitch.

Where Is The Saniflo Micro Switch?

The saniflo microswitch is set at the pressure system chamber inside the macerator unit. The micro switch will be released by detecting the water pressure, only the pressure archives to the setpoint, the microswitch can start to work, and the macerator will typically run.

How Can We Repair The Saniflo Micro Switch To A Normal State?

今, let us find suitable ways to solve it!

The pressure microswitch controls the saniflo pump’s circuit to start and close. And the microswitch is located in the pressure sensing system of the saniflo toilet. When the toilet is flushed, water drains into the pump inside the pressure sensing system; once the water reaches the membrane, the pumps turn on, causing the blades driven by the motor to grind all the waste into tiny particles.

When some problems come here, you maybe have a bad experience. 例えば, you are hard to operate a saniflo pump to clean or not click anymore. 現時点では, you need a new micro switch for a replacement! It’s so vital for your saniflo toilet. Because people usually use the saniflo toilet for at least ten years! The correct microswitch can help us relaxedly enjoy our saniflo toilet.

Replace A New Micro Switch At Once!

Saniflo pump needs a snap action micro switch, like our unionwell G5 primary micro switch..the microswitch has high reliability and long life during use. The switch in the pressure chamber starts the pump motor and closes the pump circuit precision. Our G5 micro switch does it perfectly! You can purchase the G5 series primary micro switch as the following: