What Are The Precautions For Micro Switches

• If it is to fix the main body of the switch, use a small M2 screw, and then place the small screw on a smooth surface with a torque below 0.098N·m to fix it. L'anno scorso, to prevent the screw from loosening, it is best To use washers under the screws.
• In the free state of the action body, you must pay attention not to apply force to the button or exciter directly but to apply force in the vertical direction corresponding to the button when using it.
• The action setting after the microswitch action should be based on more than 70% del valore OT. Quando l'interruttore è acceso, the action body cannot be directly set at the action limit position. Altrimenti, it will be easy. The opening and closing caused by the impact will shorten its service life.
• Even if the action characteristic of the microswitch jumps up or down 20% del valore di specifica, it will not cause malfunction due to changes.
• In the case of soldering with a micro switch, you must remember to use an electric temperature with a temperature adjustment of 320℃max.) and complete the operation within 3 secondi. Do not place the terminal on the terminal during the operation’s completion. Esercitare forza.
• Suppose the microswitch is used under a small current and voltage. In quel caso, si consiglia di utilizzare un circuito a bassa potenza invece di uno ad alta potenza.

Produttore cinese di microinterruttori professionali & Produttore cinese di microinterruttori professionali, Ltd. si impegna a produrre e innovare vari microinterruttori. Unionwell is also an electronic component, microinterruttore, and mechanical keyboard switch manufacturer.

Elenco dei prodotti per microinterruttori di base serie Unionwell G5 >>

Over the past ten years since its establishment, we have worked together under the General Manager’s leadership and done wonders again and again. We believe teamwork can create a future and make success.

Per dettagli, please visit our unionwell website.