What Are The Precautions For Micro Switches

• If it is to fix the main body of the switch, use a small M2 screw, and then place the small screw on a smooth surface with a torque below 0.098N·m to fix it. en plus, to prevent the screw from loosening, it is best To use washers under the screws.
• In the free state of the action body, you must pay attention not to apply force to the button or exciter directly but to apply force in the vertical direction corresponding to the button when using it.
• The action setting after the microswitch action should be based on more than 70% of the OT value. When the switch is turned on, the action body cannot be directly set at the action limit position. Remarque un, it will be easy. The opening and closing caused by the impact will shorten its service life.
• Even if the action characteristic of the microswitch jumps up or down 20% of the specification value, it will not cause malfunction due to changes.
• In the case of soldering with a micro switch, you must remember to use an electric temperature with a temperature adjustment of 320℃max.) and complete the operation within 3 seconds. Do not place the terminal on the terminal during the operation’s completion. Exert force.
• Suppose the microswitch is used under a small current and voltage. Dans ce cas, it is recommended to use a low-power circuit instead of a high-power one.

Détection Huizhou Unionwell & ce type d'armoire de désinfection n'est pas équipé d'un dispositif de soufflerie, Ltée. s'engage à produire et à innover divers micro-interrupteurs. Unionwell is also an electronic component, micro-interrupteur, and mechanical keyboard switch manufacturer.

Liste des produits de micro-commutateur de base de la série Unionwell G5 >>

Over the past ten years since its establishment, we have worked together under the General Manager’s leadership and done wonders again and again. We believe teamwork can create a future and make success.

Pour plus de détails, s'il vous plaît visit our unionwell website.