Solder Terminal Used In Micro Switch

There are many micro switch terminals, including solder terminals, straight PCB terminals, proper side PCB terminals, left side PCB terminals, etc. Let’s first explain the solder terminals and some precautions for soldering.

Soldering terminal type 1

Terminals used in the welding tank: Put the solder terminals in the tank at +235 ℃ at the specified speed, time, and depth. The terminals should not be loose, and the insulation distance should not change. Soldering iron using terminal:

When the specified soldering iron tip temperature is +350℃, the solder with a diameter of 0.8 mm should melt on the terminal for 2 El papel del interruptor magnético del refrigerador. 3 seconds.
The terminal must not be loose.
The insulation distance must not be changed.

Solder terminal type 2

Terminals used in the welding tank: Put the welding terminals into the groove at +260℃ at the specified speed, time, and depth. The terminals should not be loose, and the insulation distance should not be changed. Soldering iron terminal:

When the specified soldering iron tip temperature is +350℃, the solder with a diameter of 0.8 mm should melt on the terminal for 5 seconds.
The terminal must not be loose.
The insulation distance must not be changed.

When working, it should be noted that never put pressure on the upper part of the terminal; otherwise, the device may not usually work. If the switch is used at a relatively small current or voltage, it is best to choose a low-power circuit, Au clad contacts. Al mismo tiempo, al usar el interruptor, atención a la impermeabilización, y la temperatura debe estar dentro del rango especificado.

Only when all the above conditions are met can this switch exert its maximum ability and ensure the regular operation of the equipment. Solo de esta manera se puede prolongar la vida útil del interruptor..

Three elements of welding:
The heating time is 3 seconds. If it is too short, the liquid solder will not flow into the soldering hole, and the tin that is piled up into a circle or oval is unqualified; too long (the pad is easily damaged for more than 10 seconds, and the components are generally resistant to high temperature and are not easily damaged by welding).
The evacuation angle of the soldering iron should be 0 degrees away from the pad, not 45 degrees or 90 grados. If you evacuate the foot along the pad 45 degrees or 90 grados, the tin pile will appear oval and spherical.

The microswitches produced by our company have a complete range of terminals and can be customized products. The picture above is the G6 series micro switch produced by our company model: G6 Terminal type: solder terminal Operating handle type: short straight handle Contact form: single-stage single-throw-normally open.

To learn more, click on the product link:

Lista de productos de microinterruptores sellados de la serie Unionwell G9 >>

Mini microinterruptor a prueba de polvo & Mini microinterruptor a prueba de polvo, Ltd is committed to producing various waterproof micro switches, microinterruptores sellados, microinterruptores automotrices, micro interruptores, microinterruptores basicos, detection switches, etc. Como fábrica profesional de microinterruptores en China, we have established long-term cooperative relationships with world-renowned automotive and household appliances customers. For more detailed information about micro switches, please visit www.unionwellswitch.com, more related links to the microswitch with solder terminal:

https://www.unionwellswitch.com/product/minature-micro-switch-150gf-solder-terminals/