Die IATF-Zertifizierung ist für Mikroschalter von Bedeutung
Sie fragen sich vielleicht: “Is this important? Als Designer von Automobilanwendungen, was bedeutet es für uns? Why should I care about IATF 16949 certification?” IATF 16949 is an international standard for quality management. In terms of continuous improvement, prevention of defects, and reduction of variation and waste in the automotive supply chain, any factory that meets this standard can default to its commitment to the highest standards.
Die Natur des Schalterlebens
Switch life functions several variables in switch design, Herstellung, und Endverbrauch. Eine Änderung einer dieser Variablen kann die Lebensdauer des Schalters verändern. Deshalb, Eine Switch-Lebensdauer ist nur dann von Bedeutung, wenn sie von einer Angabe der Bedingungen begleitet wird, unter denen sie gilt.
Die Anwendungsvariablen, die sich am stärksten auf die Lebensdauer des Schalters auswirken, sind Schaltungsparameter, Betätigung, die Umgebung, und die Ausfallkriterien. jedoch, switch life is not constant under a combination of these conditions. Ten switches of the same kind, tested as nearly identically as possible, are likely to have ten different life figures with a fair spread between highest and lowest. This is because subtle variations in the switch and test conditions significantly affect switch life. When thinking of practical switch life under a given set of conditions, it is best to visualize it as a frequency distribution. If one figure represents the life of the switch at these conditions, the figure should be chosen with the distribution in mind.
Snap-acting switches are manufactured with close control of materials, dimensions, and adjustments. For good switch life, it remains up to the end-user to select the correct switch and apply it properly regarding electrical, mechanisch, and environmental factors that affect its life. Just as other components do, switches wear out. jedoch, “failure” of the switch may be subtle, such as a minor drift of the operating point or a reduction in the insulation resistance that renders the switch unfit for further use in a specific application. Failures of this kind must be defined for the particular end use where specific characteristics of the switch are essential. There are more apparent modes of switch failure that can affect a wider variety of applications.
Unionwell meets the requirements of the International Automotive Task Force (IATF) 16949 standard and has relevant certificates. Based on ISO/TS 16949 (one of the most widely used international standards for quality management in the automotive industry), IATF 16949 replaced ISO/TS 16949 as the new global industry standard. It means that when you use products produced in factories that meet the IATF 16949 Standard, you can rest assured because they guarantee high quality and performance. These are the two pillars of our switch.
Unionwell has been committed to providing high-quality products and processes to customers and partners in the global automotive industry. Für mehr Details, feel free to contact us: marketing@unionwellswitch.com
