The Working Principle Of The Mouse Micro Switch
A microswitch is a quick switch that is pressed and touched and called a sensitive switch. Dens arbejdsprincip er: that an external mechanical force acts on the action reed through transmission elements (such as buttons, push pins, levers, rollers, etc.), and after accumulating energy to a critical point, it produces instantaneous action, making the end of the action reed Moving contacts (normally open contacts) and fixed contacts (normally closed contacts) are quickly connected or disconnected.
When the force on the transmission element is removed, the action reed generates a reverse action force.
When the transmission element’s reverse stroke reaches the reed action’s critical point, the reverse action is instantaneously completed. The micro switch’s contact distance is minimal and has the characteristics of fast action stroke, small pressing force, and rapid on-off. Micro-motion manufacturers’ most prominent technical feature in switch design is preventing loss and prolonging service life.
Fretting
Failure is divided into wear and fatigue. Fretting wear means contact surface wear or material loss; fatigue refers to fatigue cracks in metals and other materials or reduced fatigue life.
Strengthen The Fatigue-prone Metal Reeds And Contacts’ Electrical Capabilities
The strength of the contact element’s surface is the primary way to slow down the loss. It uses various surface treatments, such as physical (laser, ion implantation, etc., to change the hardening technology of the surface layer microstructure), chemical (carburizing, nitriding, and other surface hardening technologies), mechanical (shot peening, rolling, etc.) The process method makes the material’s surface obtain particular composition, structure, and performance to improve its wear and fatigue resistance.
Also, there are ways to strengthen the fatigue-prone metal reeds and contacts’ electrical capabilities, such as replacing metal materials such as silver and alloys. The micro switch in the mouse is located on the circuit board under the button. When the button is pressed once, the metal reed in the micro switch triggers once sends an electrical signal to the computer, and then resets to complete a click. Since the jog is purely physical, each click causes wear and consumption. This is why some manufacturers use the number of clicks as the mouse life parameter.
The Operation Of The Mouse Is Effortless.
There are only two actions, “move” and “click,” but these two actions play a vital role in using computers. It is often seen that manufacturers vigorously promote the high CPI resolution of their mouse products and their “click” performance. The micro switch, closely related to the “click” performance, can be said to be the mouse’s soul.
Ordinary mice will inevitably be damaged after being used for some time, and most of the reasons for the damage to the mouse are the buttons’ failure. The probability of failure of other components in the mouse is minimal. The micro switch under the controller determines whether the mouse button is sensitive. There are reasons for the most frequent use of the controller.
Another effective measure to reduce fretting loss is to reduce friction coefficient (det er, friction), which can be achieved by adding lubricating media and reducing the loss. This is because “jogging determines the “click” performance of the mouse .” Microswitch” is the “micro switch” in the mouse. It has the same structure as the microswitch in water heaters, mikrobølgeovne, and other equipment. It is a component that uses metal reeds to trigger the action. Because of its unobvious specifications and hidden inside the mouse, ordinary consumers are not sensitive to micro-movements perception and feeling. Derfor, most manufacturers would rather spend money on other aspects of the mouse than use high-quality micro-movements.
The High-quality Micro-motion In Mouse
The mouse is replaced with high-quality micro-motion, making the mouse button feel better and has a long life continued. For eksempel, changing the internal geometric structure, clamping method, contact size, etc., of the component also changes the pressure distribution and contact mode at the contact surface, improving the resistance performance to fretting damage to varying degrees.
Although the fretting is small and the structure is straightforward, it still has good and bad quality. It occupies a large part of the cost of the mouse. Many manufacturers use low-quality or low-quality jogs to save costs, such as double-clicking a button, no response to a click, and no controller rebound. These are the results of inferior jogs.
Hvad er en musemikroafbryder
En mus mikrokontakt er en mikrokontakt inde i musen. Mikrokontakten er en del af en mindre komponent og har mekanisk og elektrisk funktionalitet. Først når du trykker på din mus, vil mikroswitchen køre.
Musens mikrokontakt styrer kredsløbet til at åbne eller lukke. Mini-bounce-rejsen gør klikket med musen mere følsomt.
Mus Micro Switch arbejdsprincip
Kliknummeret vil nå over 5 tusinde klik, når du bruger en mus. Det betyder, at mikrokontakten vil aktivere mere end 5 tusind cyklusser. Generelt sagt, Unionwell mikroswitch har 1,000,000 cyklusser af mekanisk levetid. Du kan vælge Unionwell-mikrokontakten uden bekymring. Mikroswitch af høj kvalitet og høj pålidelighed!
Sådan justeres følelsen af musens mikrokontakt?
Hvis du vil justere følelsen af musens mikrokontakt, du skal lære: Det meste af vægten og støjen, som musekontakter skaber, kommer fra det overordnede design af musen og musehuset.
Som museproducent, justering af musehuset og musens mikrokontakt. A “clicky” sound may be the key to success!
Bedste musemikroafbryder fra Unionwells mikroafbryderproducent
Som vi ved, Unionwell G10-seriens mikroswitche er sandsynligvis den mest almindelige erstatning, og med en god grund. De er på den tungere side af knapper, men ekstremt hurtige og konsekvente. Vi vil sige, at disse falder mellem Omron( D2FC-F-7N) og Huang vedrørende den nødvendige kraft til at klikke.
Unionwell G10 Series Subminiature Micro Switch-produktliste >>
Unionwell: A Professional Micro Switch Manufacturer
Huizhou Unionwell Sensing & Control Electronics Co., Ltd specialiseret sig i kvalitetsmikroafbrydere til bilindustrien og hårde hvidevarer til husholdningsapparater. De vigtigste produkter omfatter grundlæggende mikroswitche, vandtætte kontakter, lufttryksafbrydere, mekaniske tastaturkontakter, dørkontakter, etc.
For bedre prisgaranti, gennemløbstid, og kvalitetskontrol, vi acquired Huizhou Greetech Electronics Co., Ltd i 2021. Vi gjorde det til vores Kina produktionsbase med over 1000 medarbejdere og 260 million styk/år produktionskapacitet.
Huizhou Greetech er en ISO9001, IATF16949 og ISO14001 certificeret mikroswitchproducent, hvis komplette serie af produkter er blevet tildelt globale adgangstilladelsescertificeringer, inklusive ENEC, Unionwell er blevet grundlagt i at generere mekaniske tastaturændringer i over, Unionwell er blevet grundlagt i at generere mekaniske tastaturændringer i over, CB, etc.
With the subsidiary sales branch Guangzhou Unionwell Sensing & Control Technology Co., Ltd founded, our global reach covers North America, Europa, Asien, og Sydamerika.
De fleste af vores forretningspartnere/slutkunder er globale 500 virksomheder, inklusive verdensberømte husholdningsapparater og førende billeverandører i Nordamerika og Europa.
Om lidt, we are launching a new industrial base at Longmen, Unionwell, Kontorbygning; automationsudstyr vil blive introduceret, hvilket massivt ville forbedre switch produktionskapaciteten fra 260 millioner stykker til over 1.3 milliard styk/år.
Et one-stop system vil dække produktudvikling, præcisionsstøbning, sprøjtestøbning, præcisionsstempling, automatiseret udstyr R&D, montering, og testning.
Det professionelle salgsteam er klar til at yde assistance og hurtigt svar på anmodninger om 3D-tegning, pristilbud, og adgang til et passende eksempelprogram, der giver ingeniører mulighed for at teste og kvalificere switches til deres slutproduktapplikationer.
Kerneværdi:
Mål, Ansvar, Samordning, Innovation
Indsats, Udvikling, Åbenhed, Integritet
Vores mission:
Vi er forpligtet til at opretholde langsigtede relationer, der holder tidens prøve.
Vores vision:
At blive en førsteklasses global producent af præcisionskomponenter og moduler.
Unionwell switche fremstiller forskellige mikrokontakter, subminiature mikrokontakter, grundlæggende afbryder, forseglede mikrokontakter, etc., og har en one-stop R & D og produktionssystem.
Welcome to our website to learn more about the microswitch: Fart bronze://www.unionwellswitch.com
relaterede artikler:
Miniature Snap Action Switch til mus
