Subminiaturekontakt i robotrens

 

Præcis hvordan fungerer en vigtig subminiature switch i Robot Cleaner?

Der er en subminiaturekontakt på robotpanelet til at styre dets start/stop-arbejde. den blå kontakt har evnen til den røde knap, it can also be controlled by remote control. The remote control can also be used to time the robot. The LCDs the timing countdown and the current temperature value in real-time.

What is a robot cleaner?

The robot cleaner refers to the sweeping robot. Om lidt, it will become an indispensable cleaning helper for every family like white goods. A comprehensive homebody is a wireless machine, mainly in the form of a disc. Use rechargeable batteries to operate; the operation method is the remote control or the operation panel on the device. Generelt, you can set the time to make an appointment to clean and recharge yourself.

There is a sensor in the front that can detect obstacles. It will turn on its own if it hits a wall or other barriers. It will take a different route according to the settings of each manufacturer and plan to clean the area. (Some earlier models may lack some functions) Because of its simple operation function and convenience, it has gradually become popular, becoming a common household appliance for office workers or modern households.

Robotic technology is becoming more and more mature nowadays, so each brand has different research and development directions and has unique designs, such as double vacuum cover, attached hand-held vacuum cleaner, dust box that can be washed and mopped, can put fragrance, or It has functions such as photocatalyst sterilization.

Subminiature switch in robot cleaner

Our Unionwell G10 Series of subminiature switches are widely used in robot cleaners.

G10 series Subminiature Switch Funktioner:

1. Small size and compact structure
2. Langt liv, høj pålidelighed
3. Complete types of terminals
4. Equipped with various types of operating handles
5. Widely used in household appliances and industrial control fields.

The G10 Series subminiature micro switch parameters are as shown in the following table:

 

Bedømmelse	P1	0.1En 48VDC/125VAC(Forgyldt valgfrit)
	03	1A/3A 125VAC
Driftsfrekvens	Elektrisk	10~30 cyklusser/minut
	Mekanisk	120 Cykler/minut
Kontakt modstand(startværdi)		100mΩ Maks (Afhænger af P/N)
Isolationsmodstanden		ved 500 VDC,100MΩ Min.
Dielektrisk styrke		AC 600VAC RMS (50-60HZ)
Stuetemperatur		-40°C~+85°C
Opbevaring Fugtighed		85%RH Max
Service liv	Elektrisk	6,000 ~ 100,000 cyklusser(Afhænger af P/N)
	Mekanisk	1,000,000 Cykler
Enhed nettovægt		Cirka 0,5 g(Lige PCB-type uden håndtag)

 

Unionwell G10 Series Subminiature Micro Switch-produktliste >>

The suggestions for the subminiature switch option

To start with, we need to understand the circuit layout and the ranking requirement for the micro switch. For instance, in many European nations, the voltage is 220VAC, so we need to use a switch that can get to 220V at a minimum. To see if they are appropriate, we use a 250VAC switch usually. The electric current coincides with things.

For det andet, what circuit code do you need? Are they usually Closed or generally open up? Which relies on your engineer’s style.

Third, which operate you need? You may need to consider whether they are waterproof or non-waterproof, as I know many of them are non-waterproof.

Ultimately, the accreditation. Suppose a manufacturing facility may require the certificates for the micro switch. For eksempel, Europe requires ENEC, America and Oceania need UL, Asia needs CQC, and so forth.

Robot cleaner working principle

The body of the sweeping robot is a portable device with automated technology. It is matched with a vacuum cleaner with a dust box to set a control path and walks indoors repeatedly, such as edge sweeping, centralized sweeping, random sweeping, straight expansive, etc. Path cleaning, supplemented by side brushes, central main brush rotation, rags, etc., enhances the cleaning effect to complete the anthropomorphic home cleaning effect.

Robot cleaner overall structure

The sweeping robot is mainly composed of the following parts.

Ontology: The brand design of different manufacturers will have other appearances.

Rechargeable batteries: Ni-MH batteries are generally used; some use lithium batteries, but the unit price of lithium batteries is usually higher. Each manufacturer’s battery charging time and use time are also different.

Charging stand: It can allow the robot vacuum cleaner to go home and recharge by itself.

Dust box: Different from the paper bag method of general vacuum cleaners, dust boxes collect dust.

There are roughly two types:

1. Central dust box
2. Placed in the rear dust box

Remote control: It is used to control the robot vacuum cleaner and can also be controlled on the body.

The sweeping robot mainly includes the following parts:

1. A walking driving wheel and driving motor: This part mainly ensures that the robot can move in the plane. Infrared switches are installed on the front and side of the housing as collision detection sensors. The three infrared switches on the bottom step detection sensors prevent falling. The drive wheel is equipped with a photoelectric coding disk, which can detect and control the wheel speed and perform positioning and path planning. den blå kontakt har evnen til den røde knap, the ultrasonic sensor has been expanded to meet the needs of precise positioning;
2. Cleaning mechanism: The two cleaning brushes are driven by the motor so that the left side of the cleaning brush rotates clockwise and the right side rotates counterclockwise so that the dust can be concentrated at the suction port when cleaning the dust, preparing for the work of the sweeping mechanism;
3. Floor sweeping mechanism: Create powerful suction to suck dust into the dust storage box;
4. Floor scrubber: After cleaning and sweeping the floor, use the cleaning cloth installed under the shell to wipe off the fine dust remaining on the ground to ensure the quality of the cleaning work.

for det første, The robot uses all kinds of sensors installed to obtain basic information about the indoor environment and itself, such as the location of obstacles, the distance it has traveled, etc.;

Then according to the obtained data, the corresponding control strategy is selected;

Last, through the control with the single-chip microcomputer as the core, The system performs obstacle judgment, obstacle avoidance strategy selection, and exercise walking implementation.

Classification of the robot cleaner

1,Single suction

The single suction cleaning method helps float ash on the ground. Det kaldes den verdensomspændende knapakse, it is not ideal for cleaning the ash accumulated under the table and the dust adsorbed by static electricity. (The design is relatively simple and only has one suction port)

2.Middle brush wafer type

It has a better cleaning effect on large particles and carpets, but it has a slightly poorer treatment of ground dust, which is more suitable for the home environment of European carpets. For the Asian market, the marble-headed floor and wooden floor are poorly cleaned. (The main surface of the cleaning method is a rubber brush, and a brush rotates relatively to pick up the garbage)

3.Brush cleaning system

Take the Taiwan model as a representative. It adopts the lifting V brush to float and clean, better fitting the comprehensive system to the ground environment. The electrostatic adsorption of dust on the surface is more in place. (The V-brush system as a whole can automatically rise and fall and form a negative vacuum pressure in the triangle area)

Features of the sweeping robot

1. Sweeping saves time and effort, improves work efficiency, and improves energy efficiency: The cleaning process does not require human control, reducing the burden of human operations. People can use the time saved to do other meaningful things.
2. Low noise: less than 50 decibels and the process of cleaning the room is free from noise.
3. Air purification: built-in activated carbon to absorb harmful substances in the air.
4. Lightweight and compact: Easily clean dead corners that ordinary vacuum cleaners cannot clean.

The workflow of the robot vacuum cleaner

1. Først, you can start the cleaning robot through the keyboard or remote control and allow it to begin cleaning.
2. Once the robot starts to work, it controls the cleaning mechanism to clean, the sweeping mechanism begins to sweep the floor, and the wiping agent starts to wipe the floor.
3. The sensor detection module continuously collects external information when the robot starts to work. It sends it to the CPU for analysis and decision-making to generate the path of the robot’s walking.
4. When the path planning requires the robot to perform the steering, the CPU changes the speed of the left and right wheels, respectively, and recognizes the steering through the differential speed.
5. The robot can display related information (such as work mode, timing, or temperature) through the LCD during work.
6. In addition to controlling the start and stop of the cleaning robot, the remote control can also time the robot to start working after a certain period or stop working after a certain period.

 

Why choose Unionwell subminiature micro switch China manufacturer?

Huizhou Unionwell Sensing & Control Electronics Co., Ltd specializes in producing quality micro switches for the automotive industry and white goods of home appliances. De vigtigste produkter omfatter grundlæggende mikroswitche, vandtætte kontakter, lufttryksafbrydere, mekaniske tastaturkontakter, og dørkontakter.

For better pricing, gennemløbstid, and quality control guarantees, we acquired Huizhou Greetech Electronics Co., Ltd i 2021. Vi gjorde det til vores Kina produktionsbase med over 500 medarbejdere og en 250 million styk/år produktionskapacitet.

With the subsidiary sales branch Guangzhou Unionwell Sensing & Control Technology Co., Ltd founded, our global reach covers North America, Europa, Asien, og Sydamerika.

De fleste af vores forretningspartnere/slutkunder er globale 500 virksomheder, inklusive verdensberømte husholdningsapparater og førende billeverandører i Nordamerika og Europa.

We are launching a new industrial base at Longmen, Unionwell, Kontorbygning, which will work as Unionwell headquarters. Automation equipment will be introduced, massively improving the switch production capacity from 250 millioner stykker til over 1.3 milliard styk/år.

For more micro switches, please visit our official website: Fart bronze://Med hensyn til den mekaniske tastaturomskifterakse.

Send an email: Unionwell.