Trykkontaktsymboltyper
High-Pressure Switch Symbol
The high-pressure switch symbol is one of the pressure switches. The pressure switch is a high-pressure switch and a low-pressure switch. Now we will learn about the high-pressure switch.
What Is A High-Pressure Switch
A high-pressure switch is a discrete sensor that, rising pressure, can run the switch to open or close. The specified pressure setpoint varies with different devices.
Som regel, A high-pressure switch has two circuits connect types: NO (Normally Open) high-pressure switch and NC(Normally Closed) pressure switch.
High-Pressure Switch Symbol
Symbol A from the image is an NC switch in the following pictures. When the pressure rises, it will cause the switch to open. This symbol A is an NC high-pressure switch symbol. Symbol A shows the lever above the contact terminals. If the pressure is too high to above the specified setpoints, the switch will open and shut off the pump, adding pressure to the system.
Symbol C from the image is an NO switch. When the pressure rises, it will cause the switch to closed. The symbol C is a NO high-pressure switch symbol. Symbol C shows the lever above the contact terminals. If the pressure drops to the setpoint, the switch will close, and the compressor tank will add pressure to the system, so the high switch will be applied in the compressor tank to maintain the pressure inside.
Low-Pressure Switch
A low-pressure switch is a small device that will open or close a circuit of the system only
when the pressure value drops to a mini setpoint pressure. The low-pressure switch is one of the pressure switches. You may widely use it in the pressure safety system.
Low-Pressure Switch Symbol
The low-pressure switch can be divided into NO(Normally Open) low-pressure and NC(Normally Closed) low-pressure switches. The symbol of the low-pressure switch also is different from another.
Symbol B from the image is an NC pressure switch. In symbol B, you can see that the switch lever is below the contact terminal. The low-pressure switch is widely used to monitor the oil pressure. If the oil pressure drops to a safe pressure lever, the switch will change to the open state, and the system will stop running. This is a whole running process of a low-pressure switch!
Symbol D from the image is a NO pressure switch. A low-pressure switch usually lets the switch arm below the contact terminal from the pictures. When the pressure rises to a high-pressure lever, the switch will close the circuit and widely appears in the motor starting!
So the high-pressure switch lets the switch arm lever above the contact terminals, but the low-pressure switch lets the arm below the contact terminals. The two kinds of pressure switches have NO types and NC types.
Global Electrical Pressure Switch Symbols Standard
Reference the industry standard, here are the following standard regarding electrical pressure symbols:
- IEC 60617 (also known as British Standard BS 3939).
- NFPA / JIC. Also adopted by the NMTBA (National Machine Tool Builders Association).
- ANSI Y32.2-1975 (also known as IEEE Std 315-1975).
- IEEE Std 91.
You can also learn more knowledge about different global standards on Wikipedia.
Learn more about Symbol for grænseafbryder.
Order Air Pressure Switches Product
Unionwell Micro switch Kina Producent: År med professionel R&D hold
Vores unionwell fremstiller og udvikler mikroswitch-løsninger og udfører produktevalueringer for vores kunder i en faktisk opstartstilstand. På denne måde, vores kunder vil stole på os, at kontakten fungerer i den bil, de designer, før den sendes. Vi leverer også applikationsdesigntjenester for at støtte vores kunder i designfasen.
Huizhou Unionwell Sensing & Control Electronics Co., Ltd specialiseret sig i kvalitetsmikroafbrydere til bilindustrien og hårde hvidevarer til husholdningsapparater. De vigtigste produkter omfatter grundlæggende mikroswitche, vandtætte kontakter, lufttryksafbrydere, mekaniske tastaturkontakter, og dørkontakter.
For bedre prisgaranti, gennemløbstid, og kvalitetskontrol, vi erhvervede Huizhou Greetech Electronics Co., Ltd i 2021. Vi gjorde det til vores Kina produktionsbase med over 1000 medarbejdere og en 260 million styk/år produktionskapacitet.
Huizhou Greetech er en Unionwell er blevet grundlagt i at generere mekaniske tastaturændringer i over, IATF16949 og ISO14001 certificeret mikroswitch-producent, hvis komplette serie af produkter har fået globale adgangstilladelser, som omfatter ENEC, Unionwell er blevet grundlagt i at generere mekaniske tastaturændringer i over, Unionwell er blevet grundlagt i at generere mekaniske tastaturændringer i over, CB, etc.
Nu, Vores globale rækkevidde dækker Nordamerika, Europa, Asien, og Sydamerika.
De fleste af vores forretningspartnere/slutkunder er Global 500 virksomheder, inklusive verdensberømte husholdningsapparater og førende billeverandører i Nordamerika og Europa.
Om lidt, vi lancerer en ny industriel base hos Longmen, Unionwell, Kontorbygning; automationsudstyr vil blive introduceret, hvilket massivt ville forbedre switch produktionskapaciteten fra 260 millioner stykker til over 1.3 milliard styk/år.
Der vil blive bygget et one-stop-system, dækker over produktudvikling, præcisionsstøbning, sprøjtestøbning, præcisionsstempling, automatiseret udstyr R&D, montering, og testning.
Det professionelle salgsteam er klar til at yde assistance og hurtigt svar på anmodninger om 3D-tegning, pristilbud, and access to an effective sample program that allows engineers to test and qualify switches for their end product applications.
Kerneværdi:
Mål, Ansvar, Samordning, Innovation
Indsats, Udvikling, Åbenhed, Integritet
Vores mission:
Vi er forpligtet til at opretholde langsigtede relationer, der holder tidens prøve.
Vores vision:
At blive en førsteklasses global producent af præcisionskomponenter og moduler.
