Air Pressure Snap Action Micro Switch Used In Hot Water System

Air Pressure Snap Action Micro Switch Used In Hot Water System

Air pressure snap action micro switch plays a central component in various home electric applications, such as hot water systems. Today, we will learn how the hot water system works and how to adjust the air pressure snap action micro switch(hot system switch) used in the hot water system.

Air Pressure Snap Action Micro Switch Used In Hot Water System

The Different Types Of Water Heater

We cannot ignore the position of a hot water system in a home, Because the hot water system has become critical to our daily lives. The hot water system offers all the hot water we use every day. So, when you plan to replace your hot water system, It’s necessary to know that there are various types of hot water systems on the market. Now you can choose the best one you like from the four main types of hot water systems : 


Electric Hot Water System

An electric storage system uses a heating element inside a tank to heat water, similar to how an electric kettle works. The machine heats water and stores the hot water in the tank; The tank is available in various sizes and is kept hot and ready to be used.


Major Features Of An Electric Hot Water System


  • A low upfront cost
  • Convenient and easy to use
  • Produces hot water on demand
  • Best choice for a family that uses a moderate amount of hot water
  • Does not require a lot of space


  • It can end up being expensive in the long run
  • Longer time recovery
  • No hot water during a power outage


Gas Hot Water System

A gas hot water system is a water heating system where the main fuel is gas. In Australia, gas hot water systems aren’t traditionally as standard as the electric tank. However, things started to change as the gas grid expanded, modern style electronic ignition continuous flow water heaters, what’s more, the flow water heaters have features like touch pad temperature control have now evolved. Gas hot water systems are suitable for most families because of their high recovery rate or rapid heating. The amount of water they can heat to a specific temperature is higher than an electric water heater. It has been proven that gas hot water systems can heat twice as fast as electric hot water systems. If you are achievable with natural or LPG gas, you should consider getting a gas hot water installation. There are two main types of this water heater: gas continuous flow and gas hot water storage tanks.  


Significant Features Of A Gas Hot Water System


  • High recovery rate or rapid heating
  • Ability to supply hot water even during a power outage
  • Low cost of operation
  • Limitless hot water


  • Higher initial cost
  • Risk of explosion


Solar Hot Heater System

With global warming becoming a real threat to the planet, eco-friendly solutions are being advocated to lower greenhouse gas emissions. Solar hot water systems are one of the best examples of eco-friendly solutions in water heating. The system is powered by solar energy that is freely available and renewable. 


Significant Features Of Solar Hot Heater System


  • A low running cost in the long run
  • Easy to use
  • High efficiency


  • Higher initial cost
  • Require sufficient roof space
  • Cold season or low levels of sunshine can affect it


Heat Pump Water Heater

Heat pump water heaters use a small amount of electricity to move heat from one place to another, rather than generating heat directly. To heat water, a heat pump works like a refrigerator in reverse. There are different heat pump systems, but the most common type is when the evaporator absorbs whatever heat energy is available from the air and vaporizes the refrigerant. This vapor is then compressed, raising its pressure and temperature. Cold water from the storage tank is now pumped through the evaporator heat exchanger, with the heated water returning to the storage cylinder. A heat pump is more energy efficient than a conventional electric water heater and draws less power. 


Significant Features Of Heat Pump Water Heater


  • High efficiency
  • Meager running costs
  • Great for a large family
  • Longer lifespan


  • Higher initial cost


Hot Water Heater Installation

If a water heater is installed improperly, many things can go wrong. A few examples: If a water heater is installed without a T&P valve (temperature relief valve, pressure relief valve that air pressure snap action micro switch can perform), it may explode. People have died because of this, so it’s essential that a water heater has one and that it is correctly installed. Suppose the water heater is a gas water heater. It’s essential that the gas line is installed correctly and that it doesn’t leak. If the water heater is an electric one, the wiring needs to be connected correctly, and if the size of the water heater is increased, then a larger wire size and breaker may be required. Usually, we need to check the items: Vent installations on gas water heaters: Is the vent on top of the water heater fully connected, and are there no gaps where carbon monoxide gases can escape? 


Hot Water Safe Using Points

  If you are worried that your water heater is in danger of exploding, read on to learn about signs you should look out for. There are several reasons your water heater can explode; however, the main reason behind water heater explosions is pressure. Anything that causes excess pressure on your water heating system, such as a poor anode rod, or a lot of sediment buildup, can all cause your water heater to explode. A gas leak can also cause your water heater to explode because it is a tremendous fire risk. 


Water Heater Explosion Warning Signs

Below we list a few signs that you should look out for if you are worried that your water heater is in danger of exploding:

  • Rotten egg smell

A rotten egg smell is typically caused by the release of sulfur, which is a symptom of a gas leak. Your water heater has a pilot flame, and we all know what happens when gas hits fire — boom! If you start smelling this scent near the water heater, call a professional ASAP

  • Popping noises

Over time, sediment can build up at the bottom of your tank, so you need to drain it at least twice a year. If too much sediment builds up, water and air can get stuck underneath it and cause a pressure buildup and popping noises. Like the high water pressure, this can cause your water heater to explode.

  • Leaking pressure valve

Your pressure valve’s job is to ensure that too much pressure doesn’t build up inside the tank when your heater is treating water. But sometimes, the safety mechanisms meant to do this can malfunction and allow too much pressure to build up. This causes the pressure valve to leak and is a telltale sign of a dangerous problem. But if you choose the pressure valve that uses our air pressure switch, you won’t be so worried about the leaking pressure valve. Because our snap action switch can provide a high switching capability up to 16A 125/250VAC for pressure valve, and high sensitive reliability snaps to action. 


Unionwell GPS100 Series Air Pressure Snap Action Micro Switch(Hot System Switch)


  • Set point range:10-1500Pa
  • Operation pressure range:25-1500Pa
  • Switch pressure range:10PaMin
  • Fixed setpoint calibrated in the factory


  • Positive pressure sensing only–Connect the sample line to H while L remains open to the atmosphere.
  • Negative pressure sensing only–Connect the sample line to L while H remains open to the atmosphere.
  • Differential pressure sensing–Connect the higher pressure sample line to H and the lower pressure samples line to L.


For more air pressure snap action micro switch, please visit our website:

Contact us to learn more about the air pressure hot system switch. Our official email is  

Share this post