The Working Principle Of The Mouse Micro Switch

A microswitch is a quick switch that is pressed and touched and called a sensitive switch. Its working principle is: that an external mechanical force acts on the action reed through transmission elements (such as buttons, push pins, levers, rollers, jne.), and after accumulating energy to a critical point, it produces instantaneous action, making the end of the action reed Moving contacts (normally open contacts) and fixed contacts (normally closed contacts) are quickly connected or disconnected.

When the force on the transmission element is removed, the action reed generates a reverse action force.

When the transmission element’s reverse stroke reaches the reed action’s critical point, the reverse action is instantaneously completed. The micro switch’s contact distance is minimal and has the characteristics of fast action stroke, small pressing force, and rapid on-off. Micro-motion manufacturers’ most prominent technical feature in switch design is preventing loss and prolonging service life.

Fretting

Failure is divided into wear and fatigue. Fretting wear means contact surface wear or material loss; fatigue refers to fatigue cracks in metals and other materials or reduced fatigue life.

Strengthen The Fatigue-prone Metal Reeds And Contacts’ Electrical Capabilities

The strength of the contact element’s surface is the primary way to slow down the loss. It uses various surface treatments, such as physical (laser, ion implantation, jne., to change the hardening technology of the surface layer microstructure), chemical (carburizing, nitriding, and other surface hardening technologies), mechanical (shot peening, rolling, jne.) The process method makes the material’s surface obtain particular composition, structure, and performance to improve its wear and fatigue resistance.

Also, there are ways to strengthen the fatigue-prone metal reeds and contacts’ electrical capabilities, such as replacing metal materials such as silver and alloys. The micro switch in the mouse is located on the circuit board under the button. When the button is pressed once, the metal reed in the micro switch triggers once sends an electrical signal to the computer, and then resets to complete a click. Since the jog is purely physical, each click causes wear and consumption. This is why some manufacturers use the number of clicks as the mouse life parameter.

The Operation Of The Mouse Is Effortless.

There are only two actions, “move” ja “click,” but these two actions play a vital role in using computers. It is often seen that manufacturers vigorously promote the high CPI resolution of their mouse products and their “click” performance. The micro switch, closely related to the “click” performance, can be said to be the mouse’s soul.

Ordinary mice will inevitably be damaged after being used for some time, and most of the reasons for the damage to the mouse are the buttons’ failure. The probability of failure of other components in the mouse is minimal. The micro switch under the controller determines whether the mouse button is sensitive. There are reasons for the most frequent use of the controller.

Another effective measure to reduce fretting loss is to reduce friction coefficient (that is, friction), which can be achieved by adding lubricating media and reducing the loss. This is because “jogging determines the “click” performance of the mouse .” Microswitch” is the “mikrokytkin” in the mouse. It has the same structure as the microswitch in water heaters, mikroaaltouunit, and other equipment. It is a component that uses metal reeds to trigger the action. Because of its unobvious specifications and hidden inside the mouse, ordinary consumers are not sensitive to micro-movements perception and feeling. Siksi, most manufacturers would rather spend money on other aspects of the mouse than use high-quality micro-movements.

The High-quality Micro-motion In Mouse

The mouse is replaced with high-quality micro-motion, making the mouse button feel better and has a long life continued. For example, changing the internal geometric structure, clamping method, contact size, jne., of the component also changes the pressure distribution and contact mode at the contact surface, improving the resistance performance to fretting damage to varying degrees.

Although the fretting is small and the structure is straightforward, it still has good and bad quality. It occupies a large part of the cost of the mouse. Many manufacturers use low-quality or low-quality jogs to save costs, such as double-clicking a button, no response to a click, and no controller rebound. These are the results of inferior jogs.

What Is A Mouse Micro Switch

A mouse micro switch is a micro switch inside the mouse. The micro switch is part of a minor component and has mechanical and electrical functionality. Only when you press your mouse will the microswitch run.

The mouse micro switch controls the circuit open or close. The mini bounce travel makes the click of the mouse more sensitive.

Mouse Micro Switch Work Principle

The clicking number will reach over 5 thousand clicks when using a mouse. It means the micro switch will activate more than 5 thousand cycles. Generally speaking, the Unionwell microswitch has 1,000,000 cycles of mechanical service life. You can choose the Unionwell microswitch without worry. High-quality and High-reliability microswitch!

How To Adjust The Feeling Of Mouse Micro Switch?

If you want to adjust the feeling of the mouse micro switch, you should get learning: Most of the weight and noise that mouse switches create come from the overall design of the mouse and the mouse housing.

As a mouse manufacturer, adjusting the mouse housing and mouse micro switch. A “clicky” sound may be the key to success!

Best Mouse Micro Switch From Unionwell Micro Switch Manufacturer

As we know, Unionwell G10 series micro switches are likely the most common replacement, and for a good reason. They’re on the heavier side of buttons but extremely snappy and consistent. We would say that these fall between Omron( D2FC-F-7N) and Huang regarding the required force for clicking.

Unionwell G10 Series Subminiature Micro Switch Products List >>

Unionwell: A Professional Micro Switch Manufacturer

Huizhou Unionwell Sensing & Control Electronics Co., Oy on erikoistunut laadukkaisiin autoteollisuuden mikrokytkimiin ja kodinkoneiden kodinkoneisiin. Päätuotteita ovat perusmikrokytkimet, vedenpitävät kytkimet, ilmanpainekytkimet, mekaaniset näppäimistökytkimet, oven kytkimet, jne.

Parempi hintatakuu, läpimenoaika, ja laadunvalvonta, me hankittu Huizhou Greetech Electronics Co., Ltd sisään 2021. Teimme siitä Kiinan tuotantopohjamme yli 1000 työntekijät ja 260 miljoonaa kappaletta/vuosi tuotantokapasiteetti.

Huizhou Greetech on ISO9001, IATF16949- ja ISO14001-sertifioitu mikrokytkinvalmistaja, jonka koko tuotesarjalle on myönnetty maailmanlaajuiset käyttölupasertifikaatit, mukaan lukien ENEC, UL, CE, CB, jne.

Tytäryhtiön myyntikonttorin kanssa Guangzhou Unionwell Sensing & Control Technology Co., Oy perustettu, maailmanlaajuinen ulottuvuutemme kattaa Pohjois-Amerikan, Euroopassa, Aasia, ja Etelä-Amerikassa.

Suurin osa liikekumppaneistamme/loppuasiakkaistamme on kansainvälisiä 500 yrityksille, mukaan lukien maailmankuulut kodinkonemerkit ja johtavat autoteollisuuden toimittajat Pohjois-Amerikassa ja Euroopassa.

Pian, lanseeraamme uuden teollisen tukikohdan Longmeniin, Huizhou, Guangdongin maakunta; automaatiolaitteet otetaan käyttöön, mikä parantaisi merkittävästi kytkimien tuotantokapasiteettia 260 miljoona kappaletta yli 1.3 miljardia kappaletta/vuosi.

Yhden luukun järjestelmä kattaa tuotekehityksen, tarkkuusmuovaus, ruiskuvalu, tarkkuus leimaus, automaattiset laitteet R&D, kokoonpano, ja testaus.

Ammattitaitoinen myyntitiimi on valmiina tarjoamaan apua ja nopeaa vastausta 3D-piirustuspyyntöihin, hintatarjouksia, ja pääsy riittävään näyteohjelmaan, jonka avulla insinöörit voivat testata ja hyväksyä kytkimiä lopputuotesovelluksia varten.

Ydinarvo:

Päämäärä, Vastuullisuus, Koordinaatio, Innovaatio

Vaivaa, Kehitys, Avoimuus, Rehellisyys

Tehtävämme:

Olemme velvollisia ylläpitämään pitkäaikaisia suhteita, jotka kestävät ajan kokeen.

Näkemyksemme:

Tullakseen ensiluokkaiseksi maailmanlaajuiseksi tarkkuuskomponenttien ja moduulien valmistajaksi.

Unionwell switches manufacture various micro switches, pienikokoiset mikrokytkimet, basic switch, sealed micro switches, jne., and has a one-stop R & D and production system.

Welcome to our website to learn more about the microswitch: https://www.unionwellswitch.com